|
swmn | I generally pull NMEA out of the P&CM serial port. The connector is a 12 pin deutsch located above the headliner generally in the area of the right rear corner post, although some are closer to the center of the rear part of the headliner if that makes sense. Blows my mind that a connector as often used as that one is is hidden above the headliner but I guess that's just how it is. It's pinned the same as the 12 pin nav diagnostic connector used in the earlier tractors so you can use the same cabling. | |
|
Intelivew 12 T 8.410 NMEA 0183 output.
