|
| I have a 2008 1770NT 16 row that would initially run on two remotes. Had the deere 350 monitor which I upgraded to agleader. Moved markers to be separate from lift and it needed three remotes then. The two vacuum fans were tied together on one remote and had a pair of needle valves mounted together that hung on the back of the cab so you could fine tune each side. You could get a 16 row with a single vacuum fan but they are not as common. Mine is also a CCS. Pulled it with a deere 4560 for a few years before upgrading to an 8000 series. What you want can be found. I would personally only buy aNT frame from deere or a 3600 from Kinze. The IH planters that are a little older take a boatload of hydraulic flow and I doubt if your tractor could run it. | |
|
Possible planter upgrade wish list questions.
