Posted 4/1/2025 18:02 (#11170665 - in reply to #11170636) Subject: RE: Too much slop in drawpin
Is that the largest pin that fits in tractor side? If varied sizes always have one side almost tight. You could weld in weld on implement hitch point. And, or put a bushing in. I am going to borrow the pipe idea. I-have an old JD 10/10 cultivator. Worn bad, patched, worn. With a draw pin that’s not great. *i don’t want to damage good pin*. For little I use it. A pipe is a great idea.
Too much slop in drawpin
